| Morphology: | Solid-State |
|---|---|
| Application: | Construction, Woodworking |
| Material: | Polyurethane |
| Classification: | Hot Melt |
| Characteristic: | Weatherability |
| Color: | White |
| Samples: |
|---|
Suppliers with verified business licenses
| EB2401.1 Edge Banding PUR hot melt adhesive technical data sheet | |||
| item | Conditions | result | remark |
| viscosity | 160ºC,Bolivar viscometer,27#rotor,2RPM. | 85000±35000 MPas | its initial adhesion is very good, so the viscosity is high. |
| Volatile matter | % | 0% | |
| used glue temperature | ºC | 150-160ºC | |
| Temperature of melt | Ambient temperature ≥20ºC, gluegun's temperature controlled at 150-160ºC | 150ºC | |
| When the ambient temperature is less than 20 ° C, the substrate and edge bandings must be preheated to 20-35 ° C, and the gluegun's temperature should be controlled at about 160 ° C. | 160ºC | ||
| (crosslinking) reaction time | It depends on the environment | 2 - 5 days | |
| Glue spread g/m2 | wood Particle board | 180 g/m2 | In winter, if the temperature is low or the high initial adhesion needed , the amount of glue spread can be slightly increased. |
| Particleboard osb | 150-180 g/m2 | ||
| Density board Multi-layer board Ecological board (large core board) | 150 g/m2 | ||
| Opening hours | 160ºC | about 7±2 s | |
| colour | White translucent solid | ||
| Softening point | ºC | about 81±3 ºC | |
| Packing requirement | 20 or 200kg net weight with amlumium foil bag in each bucket | Iron bucket without rolling hoop, moisture-proof sealed package | Buckets of different sizes are available on requests |
| Transport condition | There are three main modes of transport: land transport, sea transport and air transport. When choosing the mode of transport, factors such as the volume, weight, transport distance, speed and safety of the goods need to be taken into account. Among them, air transport is a relatively fast and safe mode of transportation, but it also has its limitations. | According to the requirements of the <Dangerous Goods Transport rule>, hot melt adhesives are classified as non-dangerous goods and can therefore be transported by air. However, in the actual transportation process, attention should be paid to the following issues: 1. Temperature control: the melting point is generally above 100 ° C, and the temperature needs to be controlled during air transport to avoid melting or deformation. 2. Packaging requirements: shock-proof, pressure-proof, moisture-proof and static-proof packaging materials should be used to ensure safe transportation. |
It can be transported by air, but it needs to pay attention to temperature control, packaging requirements and quality requirements. It is recommended that when choosing the air transport method, choose a regular logistics company and a fully qualified international airline, and monitor the cargo situation at any time during the transportation process to ensure that the cargo is safely transported to the destination. |
| Storage condition | The temperature is 15-25ºC in a cool and dry environment | Seal and store in original package | |
| clean | Residue in the gluing system and applicator | Use our cleaning agent CM-02/04 | CM02 is white for panel lamination adhesive,CM04 is blue for both |
Characteristics and advantages of PUR hot melt adhesive
Green and environmental protection
Reactive PUR adhesive has the advantages of both thermoplastic and thermosetting materials. Solvent-free, zero formaldehyde; Green production and application
Excellent bonding performance
Water resistance, high initial adhesion, good final adhesion strength, can be adapted to a variety of substrate paste
High and low temperature resistance
After curing, the internal molecules are cross-linked and have excellent high and low temperature resistance (high temperature resistance is much better than ordinary hot melt adhesive and AB adhesive)
Performance characteristics: good fluidity, paste substrate wide, high transparency, no wire drawing; Small smell, long opening time, suitable for production line operation.
Application: Co-extruded plate, foam board, aluminum board, wood-plastic board, plastic steel, rock board, triamine paper and other PVC, PET and other film material paste
Our factory is a high-tech enterprise with technological innovation as the core, research and development, production, application and promotion as one, specializing in providing green high-performance bonding solutions. At present, the company's main products are reactive polyurethane hot melt adhesive (PUR), which is widely used in decorative building materials, consumer electronics and other fields. The company has a strong technical research and development strength, with a postdoctoral research and development team as the core, through many years of technological research and innovation, successfully applied the "low-temperature ultra-fast solid technology" to the field of woodworking edge banding.
The company has passed the certification of quality management system ISO 9001:2015, environmental management system ISO 14000:2015, and occupational health and safety management system ISO 45001:2018, and has been certified in design.
The annual sales volume exceeds 30 million US dollars and has established stable cooperative relations with more than 30 domestic industry benchmarking enterprises and listed companies. The overseas market is growing rapidly, and the export volume has accounted for 20% of the total sales of the company.
Q1: What information is needed for adhesive recommendation?
A:Please let us know your basic requirements: the application, substrates, bonding strength, resistance, etc. ,and what's your laminator type?
Q2: How long is your delivery time?
A: Normally, it is 10 days after order confirmation. If the goods quantity above 10T, it's need to be negotiated.
Q3: Do you provide samples ? is it free or extra ?
A: Generally, we could offer samples less than 1.5kgs. But you need to pay the cost of freight.
CONTACT US:
Phone: +86-15805161443
Suppliers with verified business licenses
){kind=link}
){kind=link}